↑ Return to Hydroponics

Hydroponic Table

Design Plans for a 4 x 8 Hydroponic Table

hydroponictable

 

 

 

 

Materials for 4’ x 8’ Hydroponic Table

(Ask your Local Home Center to help you cut this table to size, and possibly deliver quote it, cut it deliver it)

Part Description

1. Tank Bottom:  Min. 1/2″ Ply board  4′ x 8′ Sheet IEA
2. Side Tank:  2 ea. – 2″ x 6″ x 96″ Board
3. End Tank: 2 ea. –  2″ x 6″ x 45″  Board
4. Front Leg: 2 ea. –  2″ x 4″ x 84″ Board
5. Rear Leg: 2 ea. –  2″ x 4″ x 96″ Board
6. Front Top Support: 1 ea. – 1″ x 3″ x 96″ Board
7. Rear Top Support: 1 ea. – 1″ x 3″ x 96″ Board
8. Top Support: 4 ea. – 1″ x 3″ x Est. 52″ Board
9. Under Support: 6 ea.  – 2″ x 4″ x 48″ Board
10. Angle Brace: 4 ea. – 2″ x 4″ x 48″ Board
11. End Brace: 2 ea. – 2″ x 3″ x 51″ Board
12. Liner Top Cap (Secure liner around top edge)
2 ea. 1″ x 2″  Board 96″
2 ea. 1″ x 2″ Board 48″
13. Liner – 72″ x 120″  6 Mil Black Poly (Rubber Liner $40)
14. 180 GPH Pond Pump

15. Mixture Tube 1/2″ PVC. Component
17 ea. – 1/2″ 90 degree Elbow
8 ea. – 1/2″ Caps (drill 1/4″ holes)
1 ea. – 1/2″ Tee
3 ea. – 1/2″ Cross Tee
1 ea. – 1/2″  90 degree Elbow slip / treaded
1 ea. – 1/2″ Straight Nipple
2 ea. – 1/2″ 10′ PVC Pipe

NOTE: Table requires 9 ea. Float Trays

 

NOTE: When installing #9 supports fasten only on Sides of Rail; Fasteners should not be applied in bottom of tank, if needed apply barrier over tops of fasteners to prevent, liner leakage problems.